Poe-152 And Poe-152S, The Ieee 802.3Af Injector And Splitter Installation - Planet Power over Ethernet Splitter POE-152S-12V User Manual

2.2 POE-152 and POE-152S, the IEEE 802.3af Injector and Splitter installation

1. Connect a standard network cable from "Ethernet+DC" of POE-152 to "Ethernet+DC" of POE-152S. The POE LED of
POE-152 / POE-152S will light on continuance. The screen in Figure 1 appears.
2. Connect the UTP cable in the package from "Ethernet" of POE-152S to the RJ-45 port of remote device.
3. Connect proper DC plug from "DC OUT" of POE-152S to remote device.
4. Power on the remote device and the LED indicator on POE-152S will remains on, the screen in Figure 2 appears.
Notice:
1. The POE-152S only accept IEEE 802.3af power supply equipment, any other in-line power device sending power
through UTP wire connects to POE-152S may cause the POE-152S malfunction.
2. Please ensure the output voltage is correct before applying power to remote device.
Figure 1: Connection to POE-152 or IEEE 802.3af POE equipment
Figure 2: Connection architecture over POE-152/152S
From POE-152 or IEEE 802.3af
Power Supply equipment
- 7 -