[Fax Settings] - Canon imageCLASS MF269dw II User Manual

[Fax Settings]

Specify the settings for sending faxes.
* Values in bold red text are the default settings for each item.
* [Fax Settings] may not be displayed depending on the model, the installed options, and other settings.
[Change Default Settings](P. 493)
[Off-Hook Alarm](P. 493)
[ECM TX](P. 494)
[Set Pause Time](P. 494)
[Auto Redial](P. 494)
[Check Dial Tone Before Sending](P. 495)
[Set Line](P. 495)
[TX Start Speed](P. 495)
[Change Default Settings]
[Menu] [Function Settings]
Change the default settings for sending Faxes.
When you press on the control panel while the fax sending screen is displayed, the settings revert to the values
specified here.
[Resolution]
[200 x 100 dpi (Normal)]
[200 x 200 dpi (Fine)]
[200 x 200 dpi (Photo)]
[200 x 400 dpi (Superfine)]
[Density]
9 levels
*1
[2-Sided Original]
[Off]
[Book Type]
[Calendar Type]
[Sharpness]
7 levels
[Initialize]
*1 May not be displayed or available depending on the model, the installed options, and other settings.
[Off-Hook Alarm]
[Menu] [Function Settings]
Adjust the volume of the alarm tone sounded when a telephone is connected and the receiver or handset is left
off the hook.
● Dragging the slider to the right increases the volume.
Settings Menu Items
[Send]

[Fax Settings]

Changing the Default Settings(P. 190)
[Send] [Fax Settings]
493
[Archive TX Document](P. 496)
[Confirm Entered Fax Number](P. 496)
[Allow Fax Driver TX](P. 496)
[Use Address Book When On-Hook](P. 496)
[Restrict Sequential Broadcast](P. 496)
[Register Log Dest to Addr Book](P. 497)
[TX Terminal ID](P. 497)
[Auto Adjust VoIP Comm. Speed](P. 497)
8W0J-0AE