Siemens SENTRON VL Series System Manual page 273

Table 8- 72
The table below shows the format (344) "I
characteristic is switched on and off.
Table 8- 73
The table below shows the format (345) "I
characteristic is switched on and off.
Table 8- 74
The table below shows the format (346) "Thermal memory" via which the thermal memory is
switched on and off.
Table 8- 75
The table below shows the format (347) "Phase loss sensitivity" via which the phase loss
sensitivity is switched on and off.
Table 8- 76
The table below shows the format (370) "Active parameter set" that specifies which of the
parameter sets is active.
Table 8- 77
3WL/3VL circuit breakers with communication capability - PROFIBUS
System Manual, 03/2011, A5E01051353-02
Format (343) "I2t characteristic for S"
Byte Value
0 0
0 1
Format (344) "I2t characteristic for G"
Byte Value
0 0
0 1
Format (345) "I4t characteristic for L"
Byte Value
0 0
0 1
Format (346) "Thermal memory"
Byte Value
0 0
0 1
Format (347) "Phase loss sensitivity"
Byte Value
0 0
0 1
Format (370) "Active parameter set"
Byte Value
0 0
0 1
I t characteristic for delayed short-circuit protection switched off.
2
I t characteristic for delayed short-circuit protection switched on.
2
t characteristic for G" via which the I
2
I t characteristic for ground-fault protection switched off.
2
I t characteristic for ground-fault protection switched on.
2
t characteristic for L" via which the I
4
I t characteristic for overload protection switched off.
4
I t characteristic for overload protection switched on.
4
Thermal memory switched off
Thermal memory switched on
Phase loss sensitivity switched off
Phase loss sensitivity switched on
Parameter set A active
Parameter set B active
Meaning
Meaning
Meaning
Meaning
Meaning
Meaning
Data library
8.7 Formats
t
2
t
4
273