PROFIBUS data transfer
6.5 Integration with the GSD file
Example
The figure below shows the configuration tool of STEP7 HW Config with which both the
automation system of S7 and its fieldbuses can be configured.
To insert a SENTRON circuit breaker, either a CPU with integral PROFIBUS DP interface or
a PROFIBUS DP CP card in the rack must be configured and assigned to PROFIBUS DP.
Figure 6-2
Configuration tool of STEP7 HW Config
126
3WL/3VL circuit breakers with communication capability - PROFIBUS
System Manual, 03/2011, A5E01051353-02