Siemens SENTRON VL Series System Manual page 266

Data library
8.7 Formats
Table 8- 57
The table below shows the format (108) "Number of poles" that specifies the number of
protected poles for the main circuit.
Table 8- 58
The table below shows the format (111) "Switch position DI" that also distinguishes the
switch position of the digital input module between Module 1 and 2.
Table 8- 59
The table below shows the format (119) "Switch position DO" that specifies which output
block is selected with which delay.
Table 8- 60
The table below shows the format (121) "Control DO outputs" for controlling the outputs of
the digital output modules with rotary coding switches.
266
Format (107) "Switched-off I2t values"
Byte Bit
0 —
4 —
8 —
12 —
Format (108) "Number of poles"
Byte Value
0 1
0 2
Format (111) "Switch position DI"
Byte Value
0 1
0 2
Format (119) "Switch position DO"
Byte Value
0 0x01
0 0x02
0 0x03
0 0x04
0 0x05
0 0x06
0 0x07
0 0x08
0 0x09
0 0x0A
Meaning
Phase L1 (unsigned long)
Phase L2 (unsigned long)
Phase L3 (unsigned long)
Phase N (unsigned long)
Meaning
3-pole
4-pole (with N-conductor)
Meaning
Parameter set switching (Module #1)
6 x digital inputs (Module #2)
Meaning
Module #1 trip instantaneous
Module #1 trip delayed 200 ms
Module #1 trip delayed 500 ms
Module #1 trip delayed 1 s
Module #1 trip delayed 2 s
Module #2 alarm instantaneous
Module #2 alarm delayed 200 ms
Module #2 alarm delayed 500 ms
Module #2 alarm delayed 1 s
Module #2 alarm delayed 2 s
3WL/3VL circuit breakers with communication capability - PROFIBUS
System Manual, 03/2011, A5E01051353-02