Table of Contents
Advertisement
Locking the Part of the Wired remote controller
To prevent the wired remote controller from children and
changing settings unwillingly, you can lock some functions of
wired remote controller.
1
Press the
mode.
Result:
2
Press the
Result:
Note
3
Using the
value of the
Result:
4
Press the
Result:
Note
5
Press the
Result:
Note
MWR-WH00_IB_E_31218-1.indd
Get user manuals:
See SafeManuals.com
button for 3 seconds to enter the setup
T he wired remote controller will enter the setup
mode and the menu will
display .
buttons and select menu .
Each time the
menu number increases by 1.
Press the
button to enter the lock setup
mode.
Press the
button to cancel the setting.
buttons, you can set the lock setting
,
,
,
Lock setting value
- 0: Cancel lock
- 1: Set lock
Press the
button after setting.
button to complete the part lock settings.
Changed settings will be applied.
will be displayed when the lock function is
set.
Press the
button to cancel the setting.
button.
Menu selection display will end.
If the centralized control is set, you cannot use the
part lock function.
You cannot use the part lock function when Lock all
is set.
Part Lock function can be applied to
, and
buttons only.
19
buttons are pressed,
buttons.
,
,
Fan speed button
On/off
button
Mode button
Temperature
setting button
19
E-
2009-12-14
ｿﾀﾀ・9:47:21
Advertisement
Table of Contents
