EVGA Z790 CLASSIFIED User Manual page 89

EVGA Z790 CLASSIFIED (121-RL-E798)
Other voltages do not utilize the Adaptive or Override voltage settings. Instead, these
use a pulldown menu to select preset voltages, as shown above. The voltages for these
components are set by detection during POST, and ELEET X1 will open the pulldown
to the currently detected voltage. Please remember that adjusting voltages should be
done in small steps, and even then can cause your system to become unstable and crash.
The Per-Core menu allows for both ratio and voltage adjustments on an individual core
basis. This can be very useful if you find that one or more cores can be overclocked
more or less than other cores, or requires more or less voltage for stability.
When your changes are complete, click "Apply" to accept and apply the new settings, or
click "Default" to restore stock settings.
To Save a profile, first configure and apply any and all settings. Next, click on any of the
profiles on the right side of the screen. Saved profiles show a ring around the profile,
while empty profiles have no outline. When you click on one of the profiles, it will be
filled in. If you have previously saved a profile here, click "Load" to apply your profile.
Once loaded, you may close ELEET X1 and continue to use the new settings.
- 89 -