EVGA Z790 CLASSIFIED User Manual page 71

EVGA Z790 CLASSIFIED (121-RL-E798)
1. Verify that all the drives intended for the array are present on the screen, then
click "Create RAID Volume" to begin the process. For the purpose of this
guide, we are using a pair of SATA SSDs to create the RAID1 array. If you were
using PCIe / M.2 based NVMe drives, the same basic steps apply to both,
however. For now, select SATA, and "Real-time protection (RAID1)." Then,
click Next at the bottom of the window.
- 71 -