EVGA Z790 CLASSIFIED User Manual page 65

EVGA Z790 CLASSIFIED (121-RL-E798)
7. Next, select your intended array type. Please see the bottom of Page 61 for a
quick reference on different RAID levels and RAID types based on your total
number of drives. For the purpose of this guide, we will make a RAID5.
8. Next, select the drives you want to use for the array. Select the down arrow and
the "X" for each drive you want to include in the array.
9. Strip size (also called "block size" in other controllers) can be selected manually
at 16k, 32k, 64k, or 128k. The controller will determine the default strip size
after looking at your drives and array type. Although there are some limited
instances where this must be set manually, it is highly recommended to leave
this at default.
- 65 -