EVGA Z790 CLASSIFIED User Manual page 68

EVGA Z790 CLASSIFIED (121-RL-E798)
1. To begin the repair, select the degraded RAID volume to see your array status
and all remaining drives currently configured in the RAID array. When ready,
click Rebuild to start the process.
2. Next, you will see a list of all attached HDD/SSDs that can be used to rebuild
the array. Select your preferred disk, then click on it to begin the process.
**ALL DATA ON THIS DRIVE WILL BE REMOVED AND CANNOT BE
RECOVERED WHEN ADDING IT INTO THE ARRAY**
- 68 -