Table of Contents
Advertisement
EVGA Z790 CLASSIFIED (121-RL-E798)
Multi-function Display
Power Button
Reset Button
VCORE Status
CPU VCCIN AUX Status
CPU VDD2 Status
1. Multi-function Display
a. During boot it will cycle many different hexadecimal post codes with a
range of 00-FF and this indicates what aspect of the Power On Self Test
(POST) is currently running.
i. For a list of POST Codes, please see Page 113.
b. This display can be configured in BIOS to display HW monitoring
information, such as voltage or temperature. After boot, the display will
show temperatures or voltage, depending on the BIOS configuration.
2. Power Button
a. RED: Motherboard is turned on and running.
3. Reset Button
a. WHITE: Reset button will typically flash in conjunction with HDD/SSD
LED. Depending on load, the button may flash or appear solid at times.
4. VCORE Status
a. WHITE: Voltage present (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
5. CPU VCCIN AUX Status
a. WHITE: Voltage present (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
6. CPU VDD2 Status
a. WHITE: Voltage present (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
7. CPU 1.05V Status
a. WHITE: Voltage present (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
8. CPU 1.8V Status
a. WHITE: Voltage present (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
9. PCH 1.05V Status
a. WHITE: Voltage present (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
CPU 1.05V Status
CPU 1.8V Status
PCH 1.05V Status
PCH 0.82V Status
PCH 1.8V Status
+5VSB Status
CATERR
BIOS 1 Active
BIOS 2 Active
BIOS 3 Active
CMOS CLS/BIOS Button
- 10 -
Advertisement
Table of Contents
