Advanced Settings - TCS UbiquiSTAT US4050 Configuration Manual

Configuration

Advanced Settings

Touching the ADVANCED button in the SETTINGS display brings up the first of two screens: ADVANCED 1/2 has buttons
for Network Settings (wireless models), RS-485 Network (wired models), Thermostat Type, Analog Outputs, Display
Options, and Temperature Calibration. ADVANCED 2/2 has buttons for Factory Defaults, Internal BACnet Explorer, Access
Code, System Test Mode, and System Event Log.
Advanced Screen (1/2): Wireless Models
Advanced Screen (2/2): All Models
Network Settings
Selecting either NETWORK SETTINGS or RS-485 NETWORK on the ADVANCED 1/2 screen, will open options for
configuring the RS-485 network or the BACnet Wi-Fi. You can then set/change the settings for either network.
Network Settings Screen (Wireless Models)
10
2800 Laura Lane • Middleton, WI 53562 | 800.288.9383 | www.tcsbasys.com
Advanced Screen (1/2): Wired Models
RS-485 Network Settings Screen – BACnet Mode (Wired Models)