TCS UbiquiSTAT US4050 Configuration Manual page 7

Configuration
Weekly Schedules
The UbiquiSTAT has a total of eight customizable schedule settings that can be used to create daily, weekly, or holiday
schedules. (By default, the UbiquiSTAT includes two schedule settings: an [A] Occupied setting at 8:00 AM Weekdays
setting, and an Unoccupied setting at 5:00 PM Weekdays setting.) You can link schedules to the any of the five occupancy
setpoints available. You can also combine schedules with different occupancy setpoint pairs to produce up to eight
schedule settings per day.
To create a schedule setting:
STEP 1 Touch the EDIT button on the Occupancy Sched-
ule Entries screen.
STEP 2 Select the days of the week you wish to assign
the schedule to. (If desired, touch one of the
Quick Select buttons to quickly select the respec-
tive days.) Touch the NEXT> button to bring up
the EDIT SCHEDULE screen.
STEP 3 The Edit Schedule screen will display any previ-
ously created schedules assigned to the selected
days. From this screen you can select a setpoint
pair and assign it to the weekdays you selected,
or you can touch the NEW button to create a
new setpoint pair for the selected days. You can
also delete a previously selected setpoint pair by
pressing and holding the button for three sec-
onds.
7 7
2800 Laura Lane • Middleton, WI 53562 | 800.288.9383 | www.tcsbasys.com
Occupancy Schedule Screen
Edit Schedule Days Screen
Edit Schedule Periods Screen