TCS UbiquiSTAT US4050 Configuration Manual page 14

Configuration
Room Temperature Source
Touching the ROOM TEMP SOURCE button on the ADVANCED 1/2 display allows you to configure the source of the
UbiquiSTAT's room temperature measurement. You can select the device's internal temperature sensor, a remotely
connected sensor, or you can configure an average of both. When selecting the AVERAGE button, you can fine-tune the
weighting between the internal sensor and the external sensor in five-percent increments.
Room Temperature Source Screen
Temperature Calibration
Touching the TEMP CALIBRATION button on the ADVANCED 1/2 display allows you fine-tune the temperature calibration
for the internal temperature sensor or any connected sensors for monitoring remote/mixed temperature, discharge air
temperature, or outdoor air temperature.
Temperature Sensor Calibration Screen
Remote/Mixed Sensor Calibration Screen
14
2800 Laura Lane • Middleton, WI 53562 | 800.288.9383 | www.tcsbasys.com
Room Temperature Source Averaging Screen
Internal Sensor Calibration Screen
Discharge Air Sensor Calibration Screen