TCS UbiquiSTAT US4050 Configuration Manual page 8

Configuration
STEP 4 In the START TIME screen, use the up/down ar-
rows to select the time you want the new sched-
ule to start. Select the Occupancy Setpoint pair
you wish to assign. (OPTIONAL: you can edit the
setpoints for the setpoint group you selected, but
this will change the values wherever that setpoint
pair is assigned.) Touch DONE to save your entry.
On the Edit Schedule screen, touch SAVE to save
the changes.
NOTE: Schedule periods stay in effect until the next
schedule period start time assigned to that day or until
midnight, at which point the UbiquiSTAT will revert to the
default Unoccupied setpoint pair
Holiday Schedules
The UbiquiSTAT (wired models) can hold up to 30 holiday schedule settings. Select new and choose month, day and year
for a single occurrence where the system will revert to the unoccupied mode.
NOTE: Enter holiday schedules via the touchscreen for stand-alone UbiquiSTAT applications only. Ubiquity Cloud
overwrites any stored holiday schedules upon connection.
To create a holiday schedule:
STEP 1 Touch the HOLIDAY button in the Schedule Set-
tings screen.
STEP 2 Touch the NEW button in the Holiday Schedules
screen.
8
2800 Laura Lane • Middleton, WI 53562 | 800.288.9383 | www.tcsbasys.com
Schedule Period Start Time Screen
Schedule Settings Selection: Weekly or Holiday
Holiday Schedules Screen