Install Decorative Barrier Front; Install Optional Trim Kits - Heat & Glo SL-5F-IFT Installation Manual

Hide thumbs Also See for SL-5F-IFT:
Table of Contents

Advertisement

G. Install Decorative Barrier Front
WARNING! Risk of Fire! Install ONLY decorative barrier
fronts approved by Hearth & Home Technologies. Unap-
proved decorative barrier fronts could cause fireplace to
overheat.
IMPORTANT! This fireplace requires an installed
decorative barrier front to prevent direct contact with
the hot viewing glass. DO NOT operate the fireplace
with the barrier removed.
Contact your dealer or Hearth & Home Technologies if
the barrier is not present or help is needed to properly
install one.
For more information refer to the instructions supplied with
your decorative barrier front.
68
Heat & Glo • SL-5F-IFT, SL-7F-IFT Installation Manual • 2638-980 Rev. H • 6/22
H. Install Optional Trim Kits
• Install optional trim kits and/or surrounds using the
instructions included with the accessory.
• Use non-combustible materials to cover the gap between
the sheet rock and the appliance (when applicable to
model).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl-7f-ift

Table of Contents