Table of Contents
Advertisement
4.
Remove the speakers from the computer (4).
To install the bottom speakers, reverse this procedure.
NOTE:
When installing the speakers, be sure rubber washers are installed in the screw holes in the
speakers.
Transfer board
To remove the transfer board, use this procedure and illustration.
Table 5-9
Transfer board description and part number
Description
Transfer board
Transfer board cable (available in Cable Kit)
Before removing the transfer board, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the bottom speakers (see
Remove the transfer board:
1.
Disconnect the keyboard cable from the transfer board (1).
2.
Disconnect the system board cable from the transfer board (2).
3.
Disconnect the touchpad cable from the transfer board (3).
4.
Disconnect the backlight cable from the transfer board (4).
Preparation for disassembly on page
Bottom cover on page
Battery on page
42).
Bottom speakers on page
33).
44).
Spare part number
N22942-001
N22929-001
33).
Transfer board
45
Advertisement
Table of Contents
