Solid-State Drive Specifications - HP Dragonfly Folio Maintenance And Service Manual

Table 9-2 Display specifications (continued)
Resolution
Surface treatment
Brightness
Viewing angle
Backlight

Solid-state drive specifications

This section provides specifications for your solid-state drives.
Table 9-3 Solid-state drive specifications
Dimensions
Height
Length
Width
Weight
Interface type
Ready time, maximum (to not busy)
Access times, logical
Transfer rate
Sequential read
Random read
Sequential write
Random write
Total logical sectors
Operating temperature
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may
differ slightly.
NOTE: Certain restrictions and exclusions apply. Contact support for details.
90 Chapter 9 Specifications
Metric
3000 × 2000 (3k2k)
1920 × 1280 (WUXGA+)
BrightView
Antiglare
400 nits
1000 nits (privacy panel)
UWVA
WLED
256 GB* 512 GB*
1.0 mm 1.0 mm
50.8 mm 50.8 mm
28.9 mm 28.9 mm
< 10 g < 10 g
PCIe PCIe
1.0 ms < 1.0 ms
0.1 ms 0.1 ms
up to 2150 MBps up to 2150 MBps
Up to 300,000 Up to 300,000
IOPs IOPs
up to 1550 MBps up to 1550 MBps
Up to 100,000 Up to 100,000
IOPs IOPs
468,883,296 1,000,215,216
0°C to 70°C (32°F to 158°F)
U.S.
1 TB* 2 TB*
1.0 mm 1.0 mm
50.8 mm 50.8 mm
28.9 mm 29.0 mm
< 10 g < 10 g
PCIe PCIe
1.0 ms 1.0 ms
0.1 ms 0.1 ms
up to 2150 MBps up to 2150 MBps
Up to 300,000 IOPs Up to 300,000 IOPs
up to 1550 MBps up to 1550 MBps
Up to 100,000 IOPs Up to 100,000 IOPs
1,500,336,388 2,988,316,776