Table of Contents
Advertisement
The following illustration shows tape locations. In this step, you are removing the tape shown by
callout 1.
d.
Remove the rubber plug from the middle of the bottom edge of the display (1).
e.
Note that tape routes to the left and right from the middle plug. Use tweezers to grasp the tape,
and then while turning the tweezers, wrap the tape around the tweezers from the left side of the
panel (2) as you continue to pull the tape out from behind the display panel (4). Then wrap the tape
58
Chapter 5 Removal and replacement procedures for authorized service provider parts
Advertisement
Table of Contents
