MSI 848PM User Manual page 54

Wake-Up On PME, Wake Up On Ring
These fields specify whether the system will be awakened from power saving
modes when activity or input signal of the specified hardware peripheral or compo-
nent is detected. Options: [Enabled], [Disabled].
MSI Reminds You...
You need to install a modem card supporting power on function for
"Wake Up On Ring" function.
USB KB Wake-Up from S3
This setting allows you to enter "Any Key" (max. 8 numbers) to wake up the system
from S3 state. Settings are: [Enabled] and [Disabled].
Resume by Alarm
This function is for setting time for your computer to boot up. The settings are:
[Enabled], [Disabled].
Date (of Month)
The field specifies the date for Resume by Alarm. Settings: 0~31.
Resume Time (hh:mm:ss)
The field specifies the time for Resume by Alarm. Format is <hour><minute>
<second>.
** Reload Global Timer Events **
Primary/Secondary IDE 0/1, FDD, COM, LPT Port, PCI PIRQ [A-D] #
The global timer is the hardware timer that counts down to the power saving modes.
If monitoring of the selected hardware peripherals or components is enabled, they
will awaken the system from, or reload the original count of global timer for, suspend/
sleep mode when they are accessed. Settings are: [Enabled] and [Disabled].
BIOS Setup
3-21