Table of Contents
Advertisement
MS-7037 M-ATX Mainboard
ECP Mode Use DMA
The ECP mode has to use the DMA channel, so choose the onboard parallel port
with the ECP feature. After selecting it, the following message will appear:
"ECP Mode Use DMA." At this time, the user can choose between DMA channel
[3] or [1].
PWRON After PWR-fail
This item specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Off]
[On]
[Former-Sts]
Game Port Address
This item is used to specify the address for the onboard game port. Settings:
[Disabled], [201], [209].
3-18
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the status before power failure
or interrupt occurred.
Hide quick links:
Advertisement
Table of Contents
