MSI 848PM User Manual page 41

MS-7037 M-ATX Mainboard
MSI Reminds You...
Enabling the functionality of Hyper-Threading Technology for your
computer system requires ALL of the following platform Components:
* CPU:
* Chipset: An Intel
* BIOS:
* OS:
For more information on Hyper-threading Technology, go to:
www.intel.com/info/hyperthreading
Quick Boot
Setting the item to [Enabled] allows the system to boot within 5 seconds since it will
skip some check items. Available options: [Enabled], [Disabled].
Full Screen LOGO Show
This item enables you to show the company logo on the bootup screen. Settings are:
[Enabled]
[Disabled]
1st/2nd/3rd Boot Device
The items allow you to set the sequence of boot devices where BIOS attempts to load
the disk operating system.
MSI Reminds You...
Available settings for "1st/2nd/3rd Boot Device" vary depending on
the bootable devices you have installed. For example, if you did not
install a floppy drive, the setting "Floppy" does not show up.
Boot Other Device
Setting the option to [Enabled] allows the system to try to boot from other device if the
system fails to boot from the 1st/2nd/3rd boot device.
Swap Floppy
Setting to [Enabled] will swap floppy drives A: and B:.
Floppy Seek
Setting to [Enabled] will make BIOS seek floppy drive A: before booting the system.
Settings: [Enabled], [Disabled].
Boot Up Num-Lock LED
This setting is to set the Num Lock status when the system is powered on. Setting to
[On] will turn on the Num Lock key when the system is powered on. Setting to [Off]
will allow users to use the arrow keys on the numeric keypad. Setting options: [On],
[Off].
3 - 8
® ®
An Intel Pentium 4 Processor with HT Technology;
®
Chipset that supports HT Technology;
A BIOS that supports HT Technology and has it
enabled;
An operating system that supports HT Technology.
Shows a still image (logo) on the full screen at boot.
Shows the POST messages at boot.