MSI 661FM2-V ILSR User Manual page 78

Introduction to SiS964 SATA RAID
4. Use< > < > to select disk , and press <Enter> to select disk, <Q> to exit. When
you press <Enter> on the disk you wanted, the RAID Type will be changed from
Single to JBOD.
5. After all steps finished, press <Q> until escape the setup menu and JBOD array
will be shown on the top of the main frame.
6. Once the array has been created, you will need to FDISK and FORMAT the array
as if it were a new single hard drive.
4-17