MSI 661FM2-V ILSR User Manual page 76

Introduction to SiS964 SATA RAID
7. After all steps finished, press <Q> until escape the setup menu and RAID 1 array
will be shown on the top of the main frame.
8. Press <Q> until exit this BIOS utility and the red message frame will show as the
same as the creation of the RAID 0 array. Press <Y> and <Enter> to save changes.
9. Once the array has been created, you will need to FDISK and FORMAT the array
as if it were a new single hard drive.
4-15