BIOS Setup
Integrated Peripherals
Please note that the options showed on your BIOS might be different
depending on the motherboard you buy.
On-Chip IDE
This setting controls the on-chip PCI IDE controllers. Setting options: Disabled,
Primiary, Secondary, Both.
USB Function
This setting is used to enable/disable the onboard USB controllers. Settings:
Enabled, Disabled.
USB 2.0 Controller
This setting is used to enable/disable the onboard USB 2.0 controllers. Settings:
Enabled, Disabled.
USB Legacy Support
Set to All Device if your need to use any USB 1.1/2.0 device in the operating
system that does not support or have any USB 1.1/2.0 driver installed, such as
DOS and SCO Unix. Set to No Mice only if your wan t to use any USB device
other than the USB mouse. Setting options: Disabled, Enabled.
3-21