Hard Disk Raid Connectors: Ide3, Ser1 & Ser2 (Optional) - MSI 655 Max User Manual

MS-6730 ATX Mainboard
Hard Disk RAID Connectors: IDE3, SER1 & SER2 (Optional)
The mainboard has one IDE and two serial connectors, which are
controlled by Promise 20376.
IDE3 is a 32-bit Enhanced PCI IDE and Ultra DMA 66/100/133 con-
troller that provides PIO mode 0~5, Bus Master, and Ultra DMA 66/100/133
function. You can connect up to 1 hard disk drive, and you must connect it to
a master drive.
The mainboard also provides optional dual high-speed Serial ATA in-
terface ports, SER1 & SER2. Each supports 1
rates of 150 MB/s. Both connectors are fully compliant with Serial ATA 1.0
specifications. Each Serial ATA connector can connect to 1 hard disk device.
Please refer to Serial ATA Raid manual for detail software installation
procedure.
2-18
st
generation serial ATA data
1
IDE3
SER2
SER1
7