Factory Default Settings - Miele DA 420V-6 Operating Instructions Manual

Factory default settings

If you have altered any settings, you
can reset them back to the factory
default settings.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the Start button in and, whilst
holding it in, switch the dishwasher
on using the  button.
Keep the Start button pressed in for
at least 4 seconds until the Start
indicator light comes on.
If this does not happen, start the
procedure from the beginning again.
Programme options
 Press the  programme selection
button 19 times.
The left programme indicator light will
emit 1 long flash and 9 short flash at
intervals.
The flashing sequence in the time
display indicates whether the setting
deviates from the factory default:
-  : All values are factory default
settings.
-  : At least one setting has been
changed.
 To reset the dishwasher to the factory
default settings, press the Start
button.
The setting is now stored in memory.
 Switch the dishwasher off with the
 button.
69