Miele DA 420V-6 Operating Instructions Manual page 417

 Draw two intersecting lines on the
ceiling.
 With air extraction mode:
– Place a section of the exhaust
ducting in the ceiling and feed it
down through the cross-sectional
area as illustrated. Exhaust ducting of
approx. 200 mm in length is required
between the ceiling and the
rangehood exhaust socket.
– Secure the exhaust ducting to the
exhaust socket, e.g. with a hose clip
(available as an optional accessory)
on flexible ducting.
 Place the mains cable, and for ...EXT
models the connection cable to the
external motor, in the ceiling and
guide them through the ceiling in the
area shown. A mains cable of approx.
300 mm in length is required between
the ceiling and the rangehood
connectors.
Installation
37