Table of Contents
Advertisement
Factory default settings
If you have altered any settings, you
can reset them back to the factory
default settings.
Open the door.
Switch the dishwasher off with the
button, if it is switched on.
Press the button in and, while
holding it in, switch the dishwasher
on using the button.
Keep the button pressed in for at
least 4 seconds until the indicator
light comes on.
If this does not happen, start the
procedure from the beginning again.
Programme options
Press the programme selection
button 19 times.
The top left programme indicator light
will emit 1 long flash and 9 short flash
at intervals.
The flashing sequence in the time
display indicates whether the setting
deviates from the factory default:
- : All values are factory default
settings.
- : At least one setting has been
changed.
To reset the dishwasher to the factory
default settings, press the button.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
61
Advertisement
Table of Contents
