Activating Con@Ctivity 2.0; Activating The Rangehood - Miele DA 420V-6 Operating Instructions Manual

Installing the Con@ctivity 2.0
dongle
In order for the Con@ctivity 2.0 function
to be used, the cooktop must be fitted
with the Con@ctivity dongle.
 Please read the instructions for the
Con@ctivity 2.0 dongle before
installation.

Activating Con@ctivity 2.0

In order to use the Con@ctivity 2.0
function, radio contact between the
cooktop and the rangehood must be
activated.
Both appliances must be installed and
operational.
Wireless connection must be activated
on the rangehood and the cooktop at
the same time. Activation on the
rangehood is described below.
Activation on the cooktop is described
in the relevant Operating instructions.
Please refer to the Operating
instructions before starting.
Activate the rangehood first, then the
cooktop.
Activating Con@ctivity 2.0

Activating the rangehood

 The cooktop and rangehood must be
switched off.
 Press the run-on option control 515
for approx. 10 seconds until the
indicator for the power setting 1 lights
up.
 Then press in turn,
– the "" control,
– then the "" control,
– then the lighting control .
The rangehood is now in signing on/off
mode.
If a wireless connection has not yet
been established, 2 and 3 will flash at
the same time.
If a wireless connection has already
been established, 2 and 3 will light up
constantly (Con@ctivity 2.0 is already
activated or a remote control is signed
on).
 To activate Con@ctivity 2.0, touch the
"" control.
The search for a signal starts.
 Meanwhile, start the activation of the
cooktop.
53