Child Lock - Smeg SE232TD1 Installation Instructions Manual

Ceramic hot plates touch control
Hide thumbs Also See for SE232TD1:
Table of Contents

Advertisement

EN
SWITCHING OFF THE HOT PLATE
1 The hot plate must previously be
selected.
2 Using the touch key
power level to 0.
Quick switch-off alternatives :
i) If user keep finger on the selection
sensor for 2 seconds, the related zone
will be switched off.
ii) When you press touch keys
(4/5) simultaneously, the hot plate
will switch off quickly.
RESIDUAL HEAT INDICATOR
The power indicator of the hot plate will
display an H when the glass surface
reaches a temperature that could
cause burning.
When this risk disappears,
i) the display switches off (if the device
is in stand by),
ii) or displays 0 (if the appliance is still
running).
Warning:
In a first run, H indication may appear
in a short time on the power display.
This showing is related with setup
operation and it does not mean the
cooking zone is hot.
Warning:
H indication is used for the safety
purposes in any case. Even if the
power is cut off for a long time, after
power on, H indication appears.
SWITCHING OFF THE DEVICE
The device can be switched off at any
time by pressing the general on/off
touch key
(1). In standby mode an
H will appear in the zones that are hot.
The rest of the displays will not light up.
14
Double burner hot plate
If your cooker has this option, the double
burner hot plate offers the possibility of
(4), lower the
using the inside ring or also, in addition,
the outside one, depending on the size
of the pot or pan.
SWITCHING ON THE DOUBLE HOT
PLATE
1 The related hot plate must be
selected.
and
2 Select the desired power (from 1 to 9)
using the touch key
3 Press the double hot plate touch
key
burner. When the double zone will
be activated, double zone indicator
(8) light on.
SWITCHING OFF THE DOUBLE
HOT PLATE
1 The key, by which its double burner
hot plate was switced on previously
is selected.
2
Press the double hot plate touch
key
burner. The double burner indicator
(8) will light off and the outer ring will
be deactivated
Locking of the touch keys
of the cooking hob
To prevent undesired manipulation you
can lock the entire unit, except for the
on/off touch key, using the locking touch
key
(7). This function is useful for
child safety. When the lock is activated,
the lock indicator light (9) comes on.
However, remember when the touch
control is on, the on/off touch key
(1)allows you to switch it off, even if
the lock is activated (the lock indicator
light (9) on).
On the other hand, if the touch control
is switched off, the locking function
does not allow the on/off touch key
(1) to be used.
To deactivate the locking function, press
or
(4/5).
(6) to activate the double
(6)
to deactivate the double
the locking touch key
(7) once again.
Lock indicator (9) light off and touch
control will be ready for use.

CHILD LOCK

The child lock is different and more
complicated than key lock. User can
activate key lock via one sensor. But
child lock need a sensor sequence.
The Child Lock is being used to prevent
children from turning on the hob.
Activating Child Lock :
1. The hob is switched on via
Off touch key,
2. Any zone should not be selected.
When any zone is not selected,
(5) Increase power touch key and
(4) decrease power touch key and
minus sensors is hold for 3 seconds
at same time. At the end of this
period, a short buzzer sound is heard
3. After buzzer signal , the
touch key is touched (there is no
need to keep press for a long time)
and a long buzzer sound is heard
and the Child Lock will be activated
and all power display shows "L".
During Child Lock, if user touch any
sensor (Main sensor included) , "L" will
flash on display.
Warning : Child lock status is not being
stored. If the energy of the hob is butted,
child lock status could not be preserved.
Deactivating Child Lock :
To be able to deactivate Child Lock, the
Child Lock should be activated before
and all power display show "L"
1.
(5) Increase power touch key
and
(4) decrease power touch
key and minus sensors is hold for 3
seconds at same time. At the end of
the this period, a short buzzer sound
is heard,
2. After buzzer signal , is touched to
the
(7) locking touch key (there
is no need to keep press for a long
time) and a long buzzer sound is
heard and the Child Lock will be
de activated and "Indication will be
light off.
(1) On/
(7) locking

Advertisement

Table of Contents
loading

This manual is also suitable for:

Se232tx1Se264td1Se263td1

Table of Contents