Table of Contents
Advertisement
Operation
Modules (power management)
Lock/ child safety device
The lock can be used to block operation and settings (e.g. power setting 4).
The cooking zones are grouped (see illustration) and can all be locked
together (see symbol
).
An activated lock will remain activated even if the hob is switched off! The
lock hence also serves as a child safety device in order to prevent the hob
from being operated unintentionally or intentionally.
Switching on
1. Press the plus key
symbol
until the symbol
locked. As soon as a key is pressed the
remind you of the lock function.
Switching off
2. Press the plus key
simultaneously until the symbol
have been released again.
Note:
• It is possible to switch the cooking zone off if the lock has been activated by
means of pressing the ON/OFF key
Power boost setting (P)
The power boost setting makes additional power available for induction
cooking zones. A large quantity of water can be brought to the boil very
quickly.
1. The cooking zone must be switched on.
2. Press the power key
setting. The power display will show a
3. In order to switch off the power boost setting press the minus key
the ON/OFF key
.
Power management
For technical reasons two cooking zones always comprise a module and
have a maximum power level.
If this power range is exceeded when a higher power setting level or the
power boost function is switched on the power management system will
reduce the power setting of the corresponding cooking zone of the module.
This will be shown in the display of the respective cooking zone.
and the minus key
simultaneously with the
is shown. The cooking zones will be
symbol will re-appear to
and the minus key
with the symbol
goes off. The cooking zones will
. The lock will remain activated.
once in order to activate the power boost
(booster).
GB
or
21
Advertisement
Table of Contents
