Child Safety Device / Lock; Power Boost Setting (Cooking Zones Marked With A P); Power Management - Smeg SE2320ID Instructions For Fitting And Use

Operation
24

Child safety device / lock

The child safety device/ lock can be used to lock button operation and
cooking level settings. Only the on/off button can be used to switch the hob
off.
Switching on the child-safety lock:
1. Press the on/off button
2. Then immediately press the automatic switch-off button
minus button simultaneously to activate the function. The control
lamp above the stop button will light up. The controls are locked.
Switching off the childproof lock
3. Press the on/off button
4. Then immediately press the automatic switch-off button
minus button simultaneously to de-activate the function. The control
lamp above the stop button will go off.
Activating the lock (while cooking):
• Press the automatic switch-off button
simultaneously to activate the function. The control lamp above the stop
button will light up. The controls are locked.
Switching off the lock
• Press the automatic switch-off button
simultaneously to de-activate the function. The control lamp above the stop
button will go off.
Please note
• An activated child safety device/ lock will remain activated even if the hob
is switched off. It must therefore be de-activated when cooking is re-
commenced.
• In the event of a power cut the childproof lock will be cancelled, i.e.
deactivated.

Power boost setting (cooking zones marked with a P)

The power boost setting makes additional power available for induction
cooking zones. A large quantity of water can be brought to the boil very
quickly.
The power boost setting operates for 10 minutes, after which the power level
is automatically reduced to cooking level 12.
1. Switch on the hob.
2. Press the minus button
12.
3. Press the plus button
setting. The power display will show a P.
4. After 10 minutes the power boost setting will switch off automatically. The
P will go off and the power level will switch down to 12.
Note:
In order to prematurely de-activate the power setting, press the minus button

Power management

For technical reasons two cooking zones always comprise a module and
have a maximum power level. If this power range is exceeded when a higher
power setting level or the power boost function is switched on the power
management system will reduce the power setting of the corresponding
cooking zone of the module.
The display for this cooking zone will initially blink, after which the highest-
possible power setting will be consistently displayed.
in order to switch on the childproof lock.
.
and the minus button
and the minus button
once in order to set the highest power setting
once in order to activate the power boost
GB
and the
and the
.