Booster Function; Power Management; Control Lock - Smeg Hob Instructions For The User

Hide thumbs Also See for Hob:

Table of Contents

6.10 Booster function

The booster function allows to activate the cooking zone at maximum power as long as 10 minutes. It

can be used to bring a large quantity of water to a boil rapidly or to broil meat.

Turn the knob clockwise to the "P" position for two seconds and then release; the symbol

appear on the display. After 10 minutes the booster function will automatically be disabled and cooking

will continue at power level "9".

The booster function has priority over the heating accelerator function.

The hob is fitted with a power management module that optimises/limits

consumption. If the overall imposed power levels surpass the maximum limits

permitted, the electronic circuit board will automatically manage the power

supplied by the hotplates.

The module will try to maintain the maximum possible power levels supplied and

the levels imposed by the automatic management will appear on the display. The

flashing of a power indicates that it will automatically be limited to a new level

selected by the power management module.

Priority is given to the last zone set.

The control lock is a device that protects the appliance from accidental or inappropriate use. With all the

cooking points turned off, simultaneously turn the first two knobs to the left (position "A"). Keep them

turned until the symbols

In order to remove the command lock repeat the same operations previously described.

If the knobs have been rotated in the "A" position for more than 30 seconds a fault message

appear on the display.

After a prolonged period of interruption to the power supply, the command block will be deactivated. If

this is the case, turn it back on as described above.

Instructions for the user

, appear on the display, then release the knobs.

will

Table of Contents