Switching On The Safety Lock - Smeg KF24.1 User Manual

o After 10 seconds, the audible signal will cease but "ER03" will
remain on the display until the object is removed from the
control panel.
o If any of the hob zones are still hot, then the "ER03" code will
alternate with the letter "H".
o If the appliance is switched on using the ON/OFF button (1) and
no cooking zone is activated. After 20 seconds the hob will
switch itself off automatically.
o If an object is accidentally placed on the control panel when the
hob is not switched on, it will not be possible to switch the
appliance on using the ON/OFF button (1) until you remove the
object from the control panel.

Switching on the safety lock

It is possible to lock the hob top, so that none of the cooking zones
can be switched on.
o Switch on the hob using the ON/OFF button (1).
o IMPORTANT: It is not possible to lock the hob top if any of the
cooking zones are in use. The following steps should be followed
as soon as the hob is switched on.
o Press the front right zone selection button (2) and the minus
button (4) simultaneously. Then release these two buttons and
immediately press the front right zone selection button (2)
again.
o You must complete this operation within 10 seconds of switching
the hob on. You must not touch any other keys apart from the
ones mentioned above; otherwise the hob top will not be locked.
o An "L" will appear on all of the cooking zone indicators (3).
o If any of the zones are still above 60°C from an earlier usage of
the appliance, then the letter "L" will alternate with the letter
"H".
18