Heat Dissipation; Weights And Dimensions - Nortel Meridian SuperNode SL-100 Reference Manual

5-4 Environmental specifications

Heat dissipation

The following table describes the heat dissipation for an IPE module
(NT8D37).
Table 5-4 Power/thermal load specifications summary
Equipment
IPE module (fully
loaded).
IPEC (includes
four fully loaded
IPE modules)
Note: Thermal load is given in British Thermal Units per hour (BTU/hour).
Thermal load = [total power dissipation (watts)] * 3.4.

Weights and dimensions

A single IPE module fully loaded without a pedestal and top cap weighs
approximately 130 lbs. An IPEC fully loaded with a pedestal and top cap
weighs approximately 605 lbs.
The following table gives weight and footprint dimensions.
Table 5-5 IPE weight and footprint dimensions
Equipment
Top cap
IPE
IPEC
Pedestal
555-4001-129 Standard 08.01 November 2000
Current
6.5 Amps each
26 Amps (including
pedestal)
Weight
15 lbs (6.8 kg)
130 lbs (58.9 kg) fully
loaded50 lbs (22.7 kg) empty
605 lbs (274.4 kg) includes
four modules
70 lbs (31.7 kg) full40 lbs
(18.1 kg) empty
Power Thermal load
340 Watts each 1160 BTUs per
hour
1360 Watts 4640 BTUs per
each hour
Dimension
Width-31.5 in. (80.0 cm)
Depth-22.0 in. (55.9 cm)
Height-4.0 in. (10.1 cm)
Width-31.5 in. (80
Depth-25.5 in. (64.4 cm)
Height-17.0 in. (43.2 cm)
Width-32.0 in. ( 81.2 cm)
Depth-26.0 in. ( 66.0 cm)
Height-82.0 in (208.3 cm)
Width-32.0 in. (81.2 cm)
Depth-26.0 in. (66.0 cm)
Height-10.0 in. (25.7 cm)
cm)