Empire Comfort Systems Boulevard DVLL60BP90K-2 Installation Instructions Manual page 41

MULTIFUNCTION REMOTE OPERATING INSTRUCTIONS
The Thermostat Feature may be disabled if desired.
With all the (3) AAA type batteries installed:
1. Take out one AAA battery.
2. While re-inserting the AAA battery, Push and hold down the
thermostat button. This will disable the thermostat feature on the
transmitter.
Room Thermostat (Transmitter Operation)
The Remote Control can operate as a room thermostat. The
thermostat can be set to a desired temperature to control
the comfort level in a room. To activate this function, press
the Thermostat Button Figure 70. The LCD display on the
Transmitter will change to show that the room thermostat is ON
and the set temperature is now displayed. See Figure 81. To
adjust the set temperature, press the Up or Down Arrow Buttons
until the desired set temperature is displayed on the LCD screen
of the Transmitter. See Figure 82.
41368-0-0120
Figure 81
Figure 82
Smart Thermostat (Transmitter Operation)
The Smart Thermostat function adjusts the flame height in
accordance to the difference between the set point temperature
and the actual room temperatures. As the room temperature gets
closer to the set point the Smart Function will modulate the flame
down. To activate this function, press the Thermostat Button until
the word SMART appears to the right of the temperature bulb
graphic. See Figure 83. To adjust the set temperature, press the
Up or Down Arrow Buttons until the desired set temperature is
displayed on the LCD screen of the Transmitter. See Figure 84.
NOTE: When Smart Thermostat is activated, manual flame
height adjustment is disabled.
Figure 83
Figure 84
Page 41