Table of Contents
Advertisement
All messages are stored in memory even if they're
not displayed. You can view them in the message
log. To do this, simply press the MENU key, then
highlight the "MESSAGES" label, as shown at right,
and press the right arrow key.
A screen similar to the one below appears. If there
are more messages than this screen can hold,
press the left or right arrow keys to view more
pages.
Note: Airspace messages always work in the 2D
mode. In other words, only your position and track
determine if an airspace message is shown - not
altitude. This differs from the airspace alarms.
When you're finished with this screen, press the
EXIT key to erase it.
BACKLIGHT
The AirMap's display and keyboard have lights that can be turned on for
night use. To turn the lights on, simply press the PWR key. To turn them
off, press the PWR key again.
If the unit is operating from the battery pack, it automatically turns the
lights off after 30 seconds. This helps conserve battery power. The time is
adjustable from 5 seconds to 240 seconds. Press the PWR key to turn the
lights on after the unit turns them off.
To change the backlight's delay time, press the
MENU key, then press the up or down arrow keys
until the "AUDIO/SCREEN" menu is surrounded
by the black box. Press the right arrow key. Move
the black box to the "Light Delay" label at the bot-
tom of the list. Now press the left or right arrow key
until the desired time appears on the menu. Press
the EXIT key when you're finished.
The backlight's brightness is also adjustable. To
do this, press the up or down arrow keys until the "Light" menu is sur-
rounded by the black box. Now press the left or right arrow key until you
have the lights at the desired level. Press the EXIT key when you're fin-
ished. The default light level is maximum.
71
Advertisement
Table of Contents
