Backlight - Lowrance GlobalMap Sport Installation And Operation Instructions Manual

adding the new window to the group. When it's
finished, it returns to the window selection
menu. You can now press the right or left ar-
row keys to select the next window in the group.
When you're finished selecting windows be-
fore filling the group with windows, press the
EXIT key. If you fill the group with windows, the
unit will automatically leave the reprogram
groups menu after the last window is selected.
Note:The digital boxes on the navigation and map #4 screens can also
be re-programmed. Follow the same steps show above to program the
navigation and map screens. (The menu label is called "Reprogram Boxes"
for the navigation and map screens.)
RESET GROUPS
To return all groups to their factory defaults, press the MENU key, then
press the up or down arrow keys until the black box is on the "PRESET
GROUPS" menu. Now press the right arrow key. All groups are now reset
to their factory settings.

BACKLIGHT

The GlobalMap Sport's™ display and keyboard have lights that can be
turned on for night use. Although there is a menu item "Backlight", the
easiest way to turn the lights on is to simply press the PWR key. To turn
them off, press the PWR key again.
If the unit is operating from the battery pack, it automatically turns the
lights off after 30 seconds. This helps conserve battery power. The time is
adjustable from 5 seconds to 240 seconds. Press the PWR key to turn the
lights on after the unit turns them off.
To change the backlight's delay time, press the
MENU key, then press the up or down arrow
keys until the "Delay" menu is surrounded by
the black box. Now press the left or right arrow
key until the desired time appears on the menu.
Press the EXIT key when you're finished.
The backlights brightness is also adjustable.
To do this, press the MENU key, then press
the up or down arrow keys until the "Light" menu is surrounded by the
black box. Now press the left or right arrow key until you have the lights at
the desired level. Press the EXIT key when you're finished.
30