Table of Contents
Advertisement
Fill With Gray
When the AirMap is first turned on, all water is filled with gray to distin-
guish it from land, which is clear. (See below) To make the land fill with
gray and water remain clear, press the down arrow key until the "Fill With
Gray" menu is highlighted, then press the left arrow key. Press the EXIT
key to return to the mapping screen.
FILL WITH GRAY - WATER
FILL WITH GRAY - LAND
Normally, you'll want to fill water with gray when you're using the GPS
receiver on land and fill land with gray when you're using it on the water.
PLOTTER OPTIONS
Plot Trail
The line extending from your present position is
called a plot trail. This unit lets you customize the
plot trail with the following menu items. All of the
items on the Plotter Options menu affect the plot
trail.
Plot Trail Flashing
Since there can be many lines on the mapping dis-
play, it's helpful at to make the plot trail flash. This
usually makes it easier to see. The default for plot
trail flashing is on. To turn it off, highlight the "Plot
Trail Flashing" label on the "Plotter Options" menu,
then press the left arrow key. Press the EXIT key
to return to the map. Repeat the above steps to
turn the flashing on.
29
Advertisement
Table of Contents
