External Power - Lowrance AirMap Installation And Operation Instructions Manual

IMPORTANT!
There are arrows molded into the bottom of the battery cover and battery
holder. Make certain the arrows are properly aligned! Otherwise, the bat-
tery holder won't slide all the way into the cover and the battery pack
won't slide onto the unit.
Slide the battery pack onto the unit and the AirMap is ready for use.

EXTERNAL POWER

Instead of batteries, the AirMap can operate on 6 to 35 volts DC from an
external power source. To use external power, an adapter cable is sup-
plied with your unit that will plug into your vehicle's cigarette lighter. To use
this cable, simply plug one end into the AirMap and the other end into the
cigarette lighter. A rubber plug is supplied with your AirMap to cover the
external power jack on the side of the unit when it's not in use.
You can leave the battery pack on when using external power, no damage
to the batteries or the unit will occur. However, if you remove the battery
pack from the AirMap, we recommend that the battery contact cover be
placed onto the battery pack as shown below. This will prevent the battery
pack contacts from shorting against metal objects.
A separate cover is provided for the bottom of the AirMap.
4