Recording Mode - Lorex L19LD1600 Series Instruction Manual

19" lcd color observation system with built-in 16 channel triplex digital video

Hide thumbs Also See for L19LD1600 Series:

Table of Contents

Recording Mode

RECORDING MODE:

• Indicates that the camera is recording in ALARM Mode.

• Indicates that the camera is recording in MOTION DETECTION Mode.

• Indicates that the camera is recording in CONTINUOUS Mode.

NOTE: If the power is lost, the DVR will automatically resume the recording schedule after the

power is back.

NOTE: The system will stop recording when the following occur:

• No camera video inputs are detected (the cameras are not attached to the system).

• Motion is not detected (when the record mode is set to MOTION).

• When the record schedule is set to Not Record.

• If the HDD is not formatted, or when using the factory defaults after a new HDD is installed.

• When the Overwrite function is OFF, and the HDD full.

• When the system is copying Backup data.

• When the firmware is being updated.

• When the system is in the HDD management section of the Setup Menu.

Recording Mode

Table of Contents