Recording; Recording Mode Summary - Lorex LW2702 series Instruction Manual

Recording

Recording
Three recording modes are available on the system: Manual Recording, Schedule Recording,
and Motion Recording.
NOTE: An SD card must be inserted in the wireless receiver in order to record. You should always
format the SD card prior to initial recording. For details, see "Format" on page 53.
NOTE: The system can record video to an SD card
NOTE: Recording overrides other actions on the receiver. You must stop recording on the system
in order to perform other actions, such as opening the Main Menu, Quad Mode, etc.

Recording Mode Summary

Mode Description
• Continuous recording from one camera
•
Press the Record—
recording
MANUAL
•
RECORDING Cannot record while in Quad mode
•
Cannot record while in Auto Sequence Viewing Mode
• Continuous recording from one camera or from Auto Sequence Viewing Mode
(system will record from one camera at a time)
• ATTENTION: Turn off Manual Recording and Motion Recording to enable
Schedule Recording
SCHEDULE
• Enter a Start and Stop Time from Main Menu>Record>Schedule Record
RECORDING
• Cannot enable Schedule Recording while in Quad Mode
• Cannot record while in Screen Saver Mode (i.e. if the system is in Screen Saver
Mode, Schedule Recording will be disabled)
• System only records when motion is detected by a camera
• Compatible with Quad Mode (recommended)
MOTION
• Compatible with Auto Sequence Viewing Mode
RECORDING
• Press the Motion button to start/stop Motion Recording
(AUTO)
• Enable Screen Saver for LCD receiver to simulate a picture frame
SCREEN
• Use with Motion Recording:
SAVER +
•
MOTION
•
RECORDING
For more details on each recording mode, see "Manual Recording" starting on page 27.
26
button on the remote control to start/stop manual
Press the Motion button to start Motion Recording
Press the Scan/Del button to enable Screen Saver mode
one channel at a time .