Simple Recording Mode; Recording Operation - Lorex L20WD800 Series Instruction Manual

Simple Recording Mode

Once the settings have been changed, a
status window will appear indicating that the
changes have been saved. Choose the OK
button to close the status window and return
to the Main Menu.
To return to the Record Menu, select the
Record Menu button from the Main Menu
selections.
Simple Recording Mode
Settings in the Simple Recording Mode
affect all cameras at once (i.e. all cameras
have the same FPS, Resolution, etc.). To
set each camera separately, switch to
Advanced Mode.
50
Simple Recording Mode

Recording Operation

The Recording Operation Menu allows the
user to switch between Simple and
Advanced Modes. The settings for Schedule
Mode, Pre-Event Recording Time and
Post-Event Recording Time cannot be
changed. These settings can only be
configured in Advanced mode.
Simple Recording
The Simple Recording Menu controls the
Quality, Size and FPS for all cameras at the
same time. Each channel can be set for a
single Recording Type (Continuous, Motion,
Alarm or None).
• Recording Quality - Sets the video
recording quality to Low, Standard, High
or Highest for all cameras.
• Recording Size - Sets the video capture
size for all camera to 352x240, 704x240
or 704x480 for all cameras.
• FPS - Sets the Frames Per Second for
recording across all channels. The FPS
for the channels can be set to 1, 2, 3, 7,
15 or 30 Frames per second (real time
video capture) from a shared pool of 240
FPS.