Notes On Assembling The Number Plate On The Front Licence Plate Holder - Mercedes-Benz B-Class hatchback 2022 Owner's Manual

Never touch damaged components of
#
the high-voltage on-board electrical sys-
tem.
After an accident, do not touch any com-
#
ponents of the high-voltage on-board
electrical system.
After an accident, have the vehicle trans-
#
ported away.
Have the components of the high-voltage
#
on-board electrical system checked at a
qualified specialist workshop and
replaced if necessary.
The components of the vehicle's high-voltage on-
board electrical system are marked with yellow
warning stickers. The cables of the high-voltage
on-board electrical system are orange.
High-voltage components that can become very
hot are marked with an additional warning sticker:
General notes
Vehicles with hybrid systems generate signifi-
cantly less noise when stationary and when being
driven than vehicles with combustion engines.
When driving in electric mode, the vehicle may
not be heard by other road users due to the signif-
icantly reduced noise generated.
It is for this reason that the vehicle is equipped
with a sound generator, which serves as an acous-
tic vehicle alerting system (AVAS).
Notes on assembling the number plate on the
front licence plate holder
* NOTE Malfunctions and system failures
due to incorrect assembly of the licence
plate on the front licence plate holder
If the licence plate is incorrectly assembled on
the front licence plate holder, sensors, cam-
eras or driving and safety systems may mal-
function or fail.
Observe the following points when assembling
the licence plate on the front licence plate
holder:
29