Mercedes-Benz B-Class hatchback 2022 Owner's Manual page 247

244 Driving and parking
To operate Active Distance Assist
#
DISTRONIC: press the rocker switches on the
steering wheel control unit up or down to the
desired position.
Switching between Active Distance Assist
DISTRONIC and the limiter
Press button I.
#
Activating the variable limiter or Active Distance
Assist DISTRONIC
To activate without a stored speed: press
#
rocker switch 1 up M or down N, or
select J with the left rocker switch.
or
To activate with a stored speed: select J
#
with the left rocker switch.
Active Distance Assist DISTRONIC: remove
#
your foot from the accelerator pedal.
The current vehicle speed is stored and main-
tained (Active Distance Assist DISTRONIC) or
limited (variable limiter) by the vehicle.
Adopting a detected speed limit
Activate Active Distance Assist DISTRONIC.
#
If a traffic sign has been detected and is dis-
#
played in the instrument cluster: select J
with the left rocker switch.
The maximum permissible speed on the traffic
sign is adopted as the stored speed. The vehi-
cle adapts its speed to that of the vehicle in
front, but only up to the stored speed.
Pulling away with Active Distance Assist
DISTRONIC
Activate Active Distance Assist DISTRONIC
#
and remove your foot from the brake pedal.
Select J with the left rocker switch.
#
or
Depress the accelerator pedal briefly and
#
firmly.
The functions of Active Distance Assist
DISTRONIC continue to be carried out.
Deactivating Active Distance Assist DISTRONIC
& WARNING Risk of an accident due to
Active Distance Assist DISTRONIC being
active when you leave the driver's seat
If you leave the driver's seat while the vehicle
is being braked by Active Distance Assist
DISTRONIC only, the vehicle can roll away.
Always deactivate Active Distance Assist
#
DISTRONIC and secure the vehicle to
prevent it from rolling away before you
leave the driver's seat.
Select O with the left rocker switch.
#
%
If you brake, deactivate ESP
venes, Active Distance Assist DISTRONIC is
deactivated.
Increasing/decreasing the stored speed
1 km/h: press rocker switch
#
down N to the pressure point, or press and
hold (increments of1 km/h).
or
® ®
or if ESP inter-
1 up M or