Table of Contents
Advertisement
368 Breakdown assistance
+
ENVIRONMENTAL NOTE Environmental
pollution caused by environmentally irre-
sponsible disposal
Tyre sealant contains pollutants.
Have the tyre sealant bottle disposed of
#
professionally, e.g. at a Mercedes-Benz
Service Centre.
Stow the tyre sealant bottle, the tyre inflation
#
compressor and the warning triangle.
Pull away immediately.
#
Stop driving after approximately ten minutes
#
and check the tyre pressure using the tyre
inflation compressor.
The tyre pressure must now be at least
130 kPa (1.3 bar/19 psi).
& WARNING Risk of accident due to the
specified tyre pressure not being attained
If the specified tyre pressure is not reached,
the tyre is too badly damaged. The tyre seal-
ant cannot repair the tyre in this instance.
The braking and driving characteristics may be
greatly impaired.
Do not continue driving.
#
Consult a qualified specialist workshop.
#
Countries that have Mercedes-Benz Service24h:
you will find a sticker with the telephone number,
e.g. on the B‑pillar on the driver's side.
Correct the tyre pressure if it is still at least
#
130 kPa (1.3 bar/19 psi). See the tyre pres-
sure table on the fuel filler flap for values.
Increasing the tyre pressure
Switch on the tyre inflation compressor.
#
Decreasing the tyre pressure
Remove the tyre sealant bottle from the tyre
#
inflation compressor.
Insert the filler hose in the socket of the tyre
#
inflation compressor and turn it a quarter turn
clockwise.
Press pressure release button
#
manometer B.
When the tyre pressure is correct
Unscrew the filling hose from the valve of the
#
sealed tyre.
Screw the valve cap onto the valve of the
#
sealed tyre.
Stow the tyre sealant bottle and the tyre infla-
#
tion compressor.
Drive to the nearest qualified specialist work-
#
shop and have the tyre, tyre sealant bottle and
filling hose replaced there.
C
next to
Hide quick links:
Advertisement
Table of Contents
