Mercedes-Benz B-Class hatchback 2022 Owner's Manual page 389

Table of Contents

Advertisement

386 Wheels and tyres
Tyre pressure monitor
active: the teach-in
R
process of the system is not yet complete. The
tyre pressures are already being monitored.
Compare the tyre pressure with the recom-
#
mended tyre pressure for the current operat-
ing condition (
page 384). Additionally,
/
observe the notes on cold tyres
(
page 383).
/
%
The values displayed in the on-board com-
puter may deviate from those of the tyre pres-
sure gauge as they refer to sea level. At high
elevations, the tyre pressure values indicated
by a pressure gauge are higher than those
shown by the on-board computer. In this case,
do not reduce the tyre pressure.
Restarting the tyre pressure monitoring system
Requirements:
The recommended tyre pressure is correctly
R
set for the respective operating status on all of
the wheels (
page 383).
/
Restart the tyre pressure monitoring system in the
following situations:
The tyre pressure has changed.
R
The wheels or tyres have been changed or
R
newly fitted.
On-board computer:
Service
Tyres
4
5
Swipe downwards on Touch Control on the
#
left-hand side of the steering wheel.
The
Use current pressures as new reference
values?
message is shown in the Instrument
Display.
To restart, press Touch Control on the left-
#
hand side of the steering wheel.
The
Tyre press. monitor restarted
shown in the Instrument Display.
Current warning messages are deleted and
the yellow h warning lamp goes out.
After you have been driving for a few minutes,
the system checks whether the current tyre
pressures are within the specified range. The
current tyre pressures are then accepted as
reference values and monitored.
Be sure to also pay attention to the following rela-
ted topic:
Notes on tyre pressure (
page 383)
/
R
Tyre pressure loss warning system
Function of the tyre pressure loss warning system
The tyre pressure loss warning system warns the
driver by means of display messages when there
is a severe tyre pressure loss.
System limits
The system may be impaired or may not function
particularly in the following situations:
incorrect reference values were taught in
R
sudden pressure loss caused by a foreign
R
object penetrating the tyre, for example
message is
an even pressure loss on more than one tyre
R
occurs
The system has a restricted or delayed function
particularly in the following situations:
poor ground conditions, e.g. snow or gravel
R
driving with snow chains
R
when adopting a very sporty driving style with
R
high cornering speeds or sudden acceleration
driving with a very heavy or large trailer
R
driving with a high load
R

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents