Table of Contents
Advertisement
To remove: turn cover
1
to the left and
#
remove it from the wheel arch liner.
To fit: insert cover
1
into the wheel arch liner
#
and turn it to the right until it engages.
Replacing illuminants in the halogen headlamp
Requirements:
Low beam: an H7 55 W illuminant is available.
R
High beam: an H7 55 W illuminant is available.
R
1
Low beam housing cover
2
High beam housing cover
Switch the lighting system off.
#
Remove the cover in the front wheel arch
#
(
page 152).
/
Turn the relevant housing cover anti-clockwise
#
and remove it.
Turn the socket anti-clockwise and remove it.
#
Pull the illuminant out of the socket.
#
Insert the new illuminant into the socket such
#
that the entire base of the illuminant is resting
on the bottom of the socket.
Insert the socket and turn it clockwise.
#
Position the housing cover and turn it clock-
#
wise.
Replace the cover in the front wheel arch
#
(
page 152).
/
Changing the rear bulbs (vehicles with halogen
headlamps)
Replacing the tail lamp illuminants
Due to their locations, have the illuminants for
#
the turn signal light and reversing light
changed at a qualified specialist workshop.
Light and sight 153
Windscreen wipers and windscreen washer sys-
tem
Switching the windscreen wipers on/off
g Windscreen wipers off
1
Ä Automatic wiping, normal
2
Å Automatic wiping, frequent
3
Hide quick links:
Advertisement
Table of Contents
