Mercedes-Benz B-Class hatchback 2022 Owner's Manual page 236

®
ESP trailer stabilisation may be impaired or may
not function if:
The trailer is not connected correctly or is not
R
detected properly by the vehicle.
®
Activating/deactivating ESP (Electronic Stability
Program)
Multimedia system:
© Settings Quick access
4 5 5
%
®
ESP can only be activated/deactivated using
quick access when at least one other function
is available in quick access. ESP
wise be found in the Assistance
Select ESP.
#
Select On or å Off.
#
%
®
If ESP is deactivated and drive program
Î was previously selected, drive program
A is automatically activated the next time
the vehicle is started.
®
ESP is deactivated if the å ESP
ing lamp lights up continuously in the instrument
cluster.
Observe the information on warning lamps and
display messages which may be shown in the
instrument cluster.
Function of EBD
Electronic Brakeforce Distribution (EBD) is charac-
terised by the following:
Monitoring and regulating the brake pressure
R
on the rear wheels.
Improved driving stability when braking, espe-
R
cially on bends.
®
can other-
Function of STEER CONTROL
menu.
STEER CONTROL assists you by transmitting a
noticeable steering force to the steering wheel in
the direction required for vehicle stabilisation.
This steering recommendation is given in the fol-
lowing situations:
both right wheels or both left wheels are on a
R
wet or slippery road surface when you brake
®
OFF warn-
the vehicle starts to skid
R
Driving and parking 233
System limits
STEER CONTROL may be impaired or may not
function in the following situations:
®
ESP is deactivated.
R
®
ESP is malfunctioning.
R
The steering is malfunctioning.
R
®
If ESP is malfunctioning, you will be assisted fur-
ther by the electric power steering.
HOLD function
HOLD function
The HOLD function holds the vehicle at a stand-
still without requiring you to depress the brake
pedal, e.g. while waiting in traffic.
The HOLD function is only an aid. The responsibil-
ity for the vehicle safely standing still remains with
the driver.
System limits
The HOLD function is only intended to provide
assistance when driving and is not a sufficient
means of safeguarding the vehicle against rolling
away when stationary.